A major new hospital project is using Spit Tapcon concrete screws and Spit Pulsa 700E cordless nailers to get the maximum benefit from off-site construction methods. The £338 million PFI project for St Helens and Knowsley Teaching Hospitals NHS Trust has seen the new St Helens Hospital completed and the new Whiston Hospital on schedule to be finished by 2010.
Click here for the complete story
New balustrades at Nottinghamshire County Cricket Club's Trent Bridge ground are standing firm thanks to Spit LDT Large Diameter Tapcon anchors. JWC Fabrication Ltd., which made the balustrades, used the Spit product to fix them to concrete stairs in the new Bridgford Road stand and in the refurbishment of the existing stand. In total, over 300 anchors were used on the project.
Click here for the complete story
Spit has launched the chemical anchor Epcon C8 Extreme, an epoxy resin that has been specifically formulated for rebar and stud applications requiring a high load capacity. The new formulation resin is the first to achieve European Technical Approval for rebar applications.
Click here for the complete story
Recognising the significant time savings that can be achieved using ITW Spit Tapcon screw technology, NG Bailey has included the product in its construction ‘Best Practice’ programme, which is being applied across the company.
Click here for the complete story
The transformation of Bolton Market Hall into a modern shopping mall is highlighting the advantages of fast and simple fastening systems from Spit. Contractor Lorne Stewart has used the Spit Pulsa 700E cordless nailers to install all the temporary lighting on the project and is using the Spit Tapcon anchoring system to support all of the mechanical and electrical services.
Click here for the complete storyWhen HSE Lighting and Electrical services was asked to install new lighting at a London church it turned to Spit to provide a quick and simple way of fixing cables to stone walls. By using the Spit Pulsa 700E cordless nailer and Prysmian FireFix cable fixings, HSE was able to complete the work in a week rather than the month it would have otherwise taken.
Click here for the complete story
With the Spit Pulsa 700E the chaos created by electrical wiring and
cables no longer has to be a never ending headache for electrical
contractors. With its innovative new design, it is the fastest way to
install the Spit range of cable and conduit fastening accessories
directly into steel and concrete; enabling you to go form chaos to order
in a second.
Working together with the Off-Highway Plant & Equipment Research Centre (OPERC) ITW Construction Products have just become the first manufacturer of Gas and Powder Actuated Tools to have their products vibration levels independently tested and published on the HAVTEC (Hand Arm Vibration Test Centre) register.
Click here for the complete story