Spit Torx Tapcon
High performance large diameter masonry anchor provides twice the strength of
standard Tapcon with premium corrosion protection of UltraShield
Applications
|
saddles, conduit clips, back boxes, P Clips, cable clips, cable cleats
|
|
Ductwork, cable trays, channel, suspended ceilings
|
|
Formwork, battens, base plates, plywood backer boards insulation systems to masonry
|
|
Railings, hand rails, gates, brackets and signs, fire protection and exterior
|
Product Features
| Large 8mm diameter provides maximum spacing and decreased labour costs |
| Internal Torx T-40 drive assures easy installation |
| High button head resists cam-out during installation |
| Reversed Hi-Lo thread design provides maximum pull-out values |
| Premium corrosion protection of the New Ultrashield to combat aggressive environments |
| Provided with silver colour paint to complement standard fixtures |
| Delivers twice the holding power of standard Tapcon in concrete and hollow block |
| Replaces costly expansion and chemical anchors |
| 6.5mm SDS Tapcon drill bits with hex for added convenience |
| Torx Tapcon Condrive with Torx 40 Magnetic Socket for rapid one-tool installation |
| 100 count packaging for jobsite convenience |
| Torx Tapcon can be easily removed and used again |
Specification
| Diameter | 8mm |
| Thread form | Reversed Hi-Lo |
| Point type | Nail |
| Finish | UltraShield 1,120 hours - 10% or less red rust |
| Head style | High button with Torx T-40 drive |
Installation
| With sleeve off and drill bit exposed, drill pilot hole 10mm deeper than recommended |
| anchor embedment. Snap proper anchor socket onto end of sleeve. Slide drive sleeve over drill bit |
| Insert head of Tapcon anchor into Torx 40 socket |
| Put point of anchor into pre-drilled hole and drive until anchor is fully seated |
| Ensure that the drilling tool is not set to hammer action during installation |
Substrates
| Concrete, masonry, block work, pre-cast hollow concrete beams, wood |
Product Range
| Code | Thread Ø | Drill Ø | Max Fixture | Length | Box Qty |
|---|
| 921415 | 8mm | 6.5mm | 25mm | 57mm | 100 |
| 921416 | 8mm | 6.5mm | 38mm | 70mm | 100 |
Cut Box Range
| Code | Thread Ø | Drill Ø | Max Fixture | Length | Box Qty |
|---|
| 921534 | 8mm | 6.5mm | 25mm | 57mm | 20x20 |
| 921535 | 8mm | 6.5mm | 38mm | 70mm | 15x20 |
Accessories
| Code | Description | Box Qty |
|---|
| 921417 | Torx Tapcon Condrive Kit | 1 |
| 921418 | Torx 40 Magnetic Socket | 1 |
| 921550 | Torx 40 Bit | 1 |
| 921437 | Torx Tapcon Condrive Sleeve | 1 |
Drill Bits
| Code | Description | Box Qty |
|---|
| 222768 | 6.5x160mm SDS Drill Bit | 1 |
| 921438 | 6.5x130mm Drill Bit with Hex Shoulder | 1 |
| 921433 | 6.5x170mm Drill Bit with Hex Shoulder | 1 |
Approvals
| SBCCi Approved 9759 |
| Metro-Dade Approved 02 - 0311 - 03 |
 |
