Spit LDT Large Diameter Tapcon
Large Diameter Tapcon for installation speed, high performance and easy removability,
Large Diameter Tapcon is the high performance, concrete anchor that cuts its own threads!
Applications
|
Stadium seating, tunnels, racking, shelving and conveyors
are just a few high volume applications ideal for Large Diameter Tapcon LDT.
The ease and speed of installation of the LDT can reduce installation time to
less than half the time of typical systems used today
|
Product Features
| Easily installed |
| Installs in less than half the time of M12 Shield or adhesive anchor |
| Simply drill a pilot hole and drive the LDT anchor by hand or impact wrench |
| Easily removed and reusable (in same hole only) - ensure threads engaged before torque |
| No grinding required to remove anchors |
| Lower drill bit costs than traditional anchors |
| Single piece design, no nut and washer to assemble |
| Use standard metric bits |
| Length identification head stamp |
| Close edge / spacing distance |
| Equals performance of adhesive anchors, often higher loads at shallow embedment |
| Patented saw tooth threads for easier installation on M16 and M20 sizes which dramatically reduces installation labour |
| Anti rotation serrations on the washer prevent loosening |
| Absence of exposed threads on warehouse floors reduces ware to fork lift tyres |
Specification
| Diameter | 8,10,16,20mm |
| Thread form | Thread form Reversed Hi-Lo and Patented Saw tooth thread |
| Finish | M10 and M12 - Meets ASTM B695 specifications for zinc plating of 5µm, mechanically zinc plated, this material is well suited for non-corrosive environments.
M16 and M20 - Meets ASTM B633 service condition 1 type 3. Electro deposited zinc plating of 7µm with a supplementary clear chromate finish.
|
| Head style | Hex Head with length indicator |
Installation
| Using a 8mm (for 10mm LDT),11mm (for 12mm LDT), 13mm (for 16mm LDT), 16mm (for 20mm LDT) carbide tipped bit |
| Remove dust from hole and always ensure the hole is 10mm deeper than anchor embedment |
| Using a socket wrench (hand install) or electric impact wrench, insert anchor into hole and tighten anchor until fully seated. 14mm socket (for 10mm LDT) and 19mm socket (for 13mm LDT), 21mm socket (for 16mm LDT), 24mm socket (for 20mm LDT) |
| Installation Steps for Block |
| Using a 8mm (for 10mm LDT),11mm (for 12mm LDT), 13mm (for 16mm LDT), 16mm (for 20mm LDT) carbide tipped bit |
| Remove dust from hole and always ensure the hole is 10mm deeper than anchor embedment |
| Using a socket wrench (hand install), insert anchor into hole and tighten anchor until fully seated. 14mm socket (for 10mm LDT) and 19mm socket (for 13mm LDT), 21mm socket (for 16mm LDT), 24mm socket (for 20mm LDT) |
| LDT's can be installed by hand or with an impact wrench |
| Installation by hand - is easy, simply using a socket wrench. Installation by impact wrench - recommended for faster installations or high volume projects. Installation with impact wrench is not recommended for hollow block |
Substrates
| Concrete, masonry, pre-cast hollow concrete beams, wood |
Product Range
LDT Zinc Plated 5µm
| Code | Anchor Ø | Hole Ø | Max Fixture | Length | Box Qty |
|---|
| 921372 | 10mm | 8mm | 7mm | 45mm | 50 |
| 921419 | 10mm | 8mm | 26mm | 64mm | 50 |
| 921373 | 10mm | 8mm | 38mm | 76mm | 50 |
| 921420 | 10mm | 8mm | 63mm | 101mm | 50 |
| 921421 | 10mm | 8mm | 90mm | 128mm | 50 |
| 921422 | 12mm | 11mm | 13mm | 76mm | 25 |
| 921423 | 12mm | 11mm | 38mm | 101mm | 25 |
| 921424 | 12mm | 11mm | 64mm | 127mm | 25 |
| 921425 | 12mm | 11mm | 89mm | 152mm | 25 |
LDT Zinc Plated 7µm with Chromate Finish
| Code | Anchor Ø | Hole Ø | Max Fixture | Length | Box Qty |
|---|
| 921426 | 16mm | 13mm | 6mm | 76mm | 10 |
| 921427 | 16mm | 13mm | 31mm | 101mm | 10 |
| 921428 | 16mm | 13mm | 57mm | 127mm | 10 |
| 921429 | 16mm | 13mm | 82mm | 152mm | 10 |
| 921430 | 20mm | 16mm | 32mm | 114mm | 10 |
| 921431 | 20mm | 16mm | 58mm | 140mm | 10 |
| 921432 | 20mm | 16mm | 77mm | 159mm | 10 |
LDT Cut Box Range
| Code | Anchor Ø | Hole Ø | Max Fixture | Length | Box Qty |
|---|
| 921536 | 10mm | 8mm | 7mm | 45mm | 20x4 |
| 921537 | 10mm | 8mm | 26mm | 64mm | 20x4 |
| 921538 | 10mm | 8mm | 38mm | 76mm | 20x4 |
| 921539 | 12mm | 11mm | 38mm | 101mm | 15x4 |
Accessories
| Code | Description | Box Qty |
|---|
| 921552 | 14mm Metrinch Socket for M10 LDT | 1 |
| 921553 | 19mm Metrinch Socket for M12 LDT | 1 |
| 921554 | 21mm Metrinch Socket for M16 LDT | 1 |
| 921555 | 24mm Metrinch Socket for M20 LDT | 1 |
| 921556 | 12.5mm SDS Socket Driver | 1 |
LDT Drill Bits
| Code | Description | Box Qty |
|---|
| 054053 | 8x160mm SDS Drill Bit | 1 |
| 054054 | 8x210mm SDS Drill Bit | 1 |
| 054064 | 11x160mm SDS Drill Bit | 1 |
| 222769 | 11x210mm SDS Drill Bit | 1 |
| 222770 | 11x260mm SDS Drill Bit | 1 |
| 054070 | 13x160mm SDS Drill Bit | 1 |
| 222771 | 13x250mm SDS Drill Bit | 1 |
| 054025 | 16x210mm SDS Drill Bit | 1 |
