Spit Hex Tapcon
Drill, Drive, Done
Removable, high speed, masonry fastening system that cuts its own thread into brick and concrete
Applications
|
Channel, brackets, Push / pull bars, formwork, shuttering, site barriers, temporary safety rails, security fencing
|
Product Features
| One part fixing with a large flange head eliminating the need for washers |
| Chamfered tip for easy hole access |
| 16mm diameter flange head allows fixing into confined spaces |
| Hi-lo thread for max holding power |
| Anti-rotation serrations on flange for extra grip |
Specification
| Diameter | 7.5mm |
| Thread form | Reversed Hi-Lo |
| Point type | Chamfered Tip |
Installation
| Drill pilot hole 6mm diameter, 10mm deeper than recommended anchor embedment |
| Clean out debris from the hole. Drilling the extra depth will allow for the mechanics of the anchor, therefore hole cleaning is not as important, but is advised |
| Insert Hex Head Tapcon in to 10mm socket of impact wrench |
| Seat point of anchor into pre-drilled hole and tighten until anchor is fully seated |
| Hex Head Tapcon can be installed manually for more fragile applications or in low volume use, however the speed of application is lost |
Substrates
| Concrete, masonry, pre-cast hollow concrete beams, wood |
Product Range
| Code | Thread Ø | Drill Ø | Max Fixture | Length | Box Qty |
|---|
| 016670 | 7.5mm | 6mm | 5mm | 35mm | 100 |
| 016671 | 7.5mm | 6mm | 15mm | 45mm | 100 |
| 016672 | 7.5mm | 6mm | 30mm | 60mm | 100 |
| 016673 | 7.5mm | 6mm | 50mm | 80mm | 50 |
| 016674 | 7.5mm | 6mm | 10mm | 100mm | 50 |
Accessories
| Code | Description | Box Qty |
|---|
| 016704 | Torque Limiter | 1
|
| 016707 | Impact Socket Hex 10 | 1 |
