Spit Dome Tapcon
Drill, Drive, Done
Removable, high speed, masonry fastening system that cuts its own thread into brick and concrete
Applications
|
Channel, brackets, push / pull bars, formwork, shuttering, site barriers, temporary safety rails, security fencing
|
Product Features
| T30 Drive recess for fast installation with HDI 244 / Spit 328 / Impact wrench |
| Low profile head |
| Chamfered tip for easy hole access |
| 16mm diameter flange head allows fixing into confined spaces |
| Anti-rotation serrations on flange for extra grip |
Specification
| Diameter | 7.5mm |
| Thread form | Reversed Hi-Lo |
| Point type | Chamfered Tip |
Installation
| Drill pilot hole 6mm diameter, 10mm deeper than recommended anchor embedment |
| Clean out debris from the hole. Drilling the extra depth will allow for the mechanics of the anchor, therefore hole cleaning is not as important, but is advised |
| Insert Dome Head Tapcon in to T30 Drive Socket |
| Seat point of anchor into pre-drilled hole and tighten until anchor is fully seated |
| Ensure that the drilling tool is not set to hammer action during installation |
Substrates
| Concrete, masonry, pre-cast hollow concrete beams, wood |
Product Range
| Code | Thread Ø | Drill Ø | Max Fixture | Length | Box Qty |
|---|
| 016331 | 7.5mm | 6mm | 2mm | 35mm | 100 |
| 016332 | 7.5mm | 6mm | 12mm | 45mm | 100 |
| 016333 | 7.5mm | 6mm | 27mm | 60mm | 100 |
Accessories
| Code | Description | Box Qty |
|---|
| 016658 | T30 Bit | 1 |
