Steel Pins
Designed for fixing to steel
Product Features
| Each box of 500 pins includes 1 fuel cell that will install up to 850 pins meaning no nail wastage on site |
| Pins are provided in collation strips of ten allowing them to be located in the tool quickly reducing dropped pin wastage |
| Superior guidance technology makes the pin centre in the pin guide for true 90o alignment at impact |
| Upon firing the Pulsa all-purpose steel pin is designed to stop midway at a precise point. On its way into the steel, it compresses the collation strip making it 'balloon out' to increase the bearing surface against the channel. This results in excellent holding power more than half a tonne (ultimate value!) |
Specification
| Made from high quality steel to a core hardness of 54-58Rc, Pulsa SC6 all-purpose pins give consistent fastening into a variety of materials |
| The SC6 pins patented design will not penetrate thin base materials and free flight (A36 steel into thicknesses as thin as 5mm / A572 grade steel as thin as 3mm) |
| Patented collation design means more consistent fastening. The collation breaks away cleanly during fastening resulting in fewer jams |
| ITW CP always recommends site tests where Pulsa is intended for use in critical applications. Pulsa may not be suitable for ceiling fixing where dense aggregate appears in concrete base materials |
Instructions for use
| Ease the lock-out mechanism along the pin guide to the rear of the tool |
| Insert SC6 pins in strips of 10 into the slot |
| Reverse the lock-out mechanism back towards the front of the tool, making it ready for use |
Product Range
| Code | Description | Length | Collation | Box Qty |
|---|
| 046300 | SC6 15 | 15mm | Black | 500 |
| 011226 | SC6 20 | 20mm | Black | 500 |
| 011898 | HSC6 15 | 15mm | Orange | 500 |
10 strip collation (suitable for use in 20 & 40 pin magazine) + 1 x fuel cell
