Steel Pins, Flush Head
Steel pins for fixing brittle articles. The collation cushions the head of the pin to reduce impact
Product Features
| Identified by its light grey collation the SC6 flush head pin leaves no plastic residue after firing. When installing mini trunking a flush finish prevents damage to cables |
| Each box of 500 pins includes 1 fuel cell that will install up to 850 pins meaning no nail wastage on site. Pins are provided in collation strips of ten allowing them to be located in the tool quickly reducing dropped pin wastage |
| Made from high quality steel to a core hardness of 54-58Rc, Pulsa SC6 flush head pins give consistent fastening into a variety of materials |
Specification
| The C6 flush head pins patented design will not penetrate thin base materials and free flight (A36 steel into thicknesses as thin as 5mm / A572 grade steel as thin as 3mm) |
| Superior guidance technology makes the pin centre in the pin guide for true 90o alignment at impact |
| Patented collation design means more consistent fastening. The collation breaks away cleanly during fastening resulting in fewer jams |
| ITW CP always recommends site tests where Pulsa is intended for use in critical applications. Pulsa may not be suitable for ceiling fixing where dense aggregate appears in concrete base materials |
Instructions for use
| Ease the lock-out mechanism along the pin guide to the rear of the tool |
| Insert SC6 FH pins in strips of 10 into the slot |
| Reverse the lock-out mechanism back towards the front of the tool, making it ready for use |
Product Range
| Code | Description | Length | Collation | Box Qty |
|---|
| 053203 | FH SC6 15 | 15mm | White | 500 |
10 strip collation (suitable for use in 20 & 40 pin magazine) + 1 x fuel cell
