Paslode Staple Specification
Staples are sometimes prefered as a more cost effective fixing method compared to other fastening systems, available
in a range of wire dimensions and lengths.
Staple Coatings / Material
|
Galv
The Industry Standard for most applications.
Specification - Meet the requirements in EC 5 for most
applications in service class 1 (indoor) according to ISO 2081.
|
|
Stainless Steel
Where high levels of corrosion resistance are essential.
Specification - Meet the requirements in EC 5 for most
applications in service class 1, 2 and 3 (indoor, covered
outdoor and outdoor). A2 according to AISI 304, and A4 according to AISI 316.
|
Staple Point Types
|
Chisel
Reduces the risk of wood splitting. Staple legs remain
parallel after application.
Specification - Length of chisel point varies from 0.5d to 1.5d.
|
|
Divergent
Staple legs fasten in opposite directions to increase the strength of fix.
Specification - Length of divergent point varies from 0.5d to 1.5d.
|
Staple Crown
Medium Crown
The industry standard for most applications.
Specification - 1.6mm wire size, crown width 12.7mm.
|
EN792-13 System Supply
|
The British and European Standard BS EN792-13.
Hand-held non-electric power tools
Safety requirements Part 13: Fastener driving tools:
BS EN 792-13. Item 7.2.1 a
Only those fasteners listed in the operating instructions may be used in the driving tools.
BS EN 792-13. Item 7.2.1 b
Only the main energy and the lubricants listed in the operating instructions may be used.
BS EN 792-13. Item 7.2.5 a
Fastener driving tools operated by internal combustion shall only be used with dispensers for combustible
gas which are listed in the operating instructions.
The European Standard EN 792-13:2000 has the status of a British Standard.
EN792-13 only refers to pneumatic and gas fastening systems, it does not refer to cartridge or
PAT fastening technology
|
