Paslode 2nd Fix Brad Specification
Finish brads are predominantly used for joinery where the aesthetics of the fixing process is important -
with a descreet head to minimize any adverse decorative effects.
Brad Coatings / Material
|
Electro Galv
The Industry Standard for most applications and meets the requirements in EC 5 for most
applications in service class 1 (indoor). Specification - According to ISO 2081.
|
|
Stainless Steel
Where high levels of corrosion resistance are essential.
Specification - Meets the requirements in EC 5 for most
applications in service class 1, 2 and 3 (indoor, covered
outdoor and outdoor). A2 according to AISI 304, and A4 according to AISI 316.
|
Gauge
18 Gauge
Wire diameter indication.
Specification - SWG 18 correspond to a diameter of 1.2mm.
|
16 Gauge
Wire diameter indication.
Specification - SWG 16 corresponds to a diameter of 1.65mm.
|
14 Gauge
Wire diameter indication.
Specification - SWG 14 corresponds to a diameter of 2.0mm.
|
Brad Head Types
|
Lost Head
Where a hidden fix is required.
Specification - EN 10230 - 1.
|
EN792-13 System Supply
|
The British and European Standard BS EN792-13.
Hand-held non-electric power tools
Safety requirements Part 13: Fastener driving tools:
BS EN 792-13. Item 7.2.1 a
Only those fasteners listed in the operating instructions may be used in the driving tools.
BS EN 792-13. Item 7.2.1 b
Only the main energy and the lubricants listed in the operating instructions may be used.
BS EN 792-13. Item 7.2.5 a
Fastener driving tools operated by internal combustion shall only be used with dispensers for combustible
gas which are listed in the operating instructions.
The European Standard EN 792-13:2000 has the status of a British Standard.
EN792-13 only refers to pneumatic and gas fastening systems, it does not refer to cartridge or
PAT fastening technology
|
