Spit Fix Through Bolt Anchor Range

The Spit Fix self expanding stud anchor - Torque controlled mechanical through fixing, for speed and efficiency on site

Applications

Steel & timber framework and beams, lift guide rails, industrial doors and gates, brickwork support angles, storage systems / pallet racking, stadium seating, brick ties

Product Features

Load assisted through fixing

Anti-rotation expansion sleeve

Drill bit required is same diameter as anchor

Chamfered head to protect the threads during installation

Expansion sleeve design ensures maximum expansion

Nut of Class 8 European Standard

Rolled thread to increase the strength

Sleeve with gradient to ensure quick tightening

Zinc coated expansion sleeve

Sleeve with 3 legs to distribute the expansion stress on the whole cone

Lugs to avoid the rotation of the sleeve during tightening

Spit Fix Z A4 also offers a stainless steel body for better corrosion resistance and better behaviour in cracked concrete. Therefore achieving ETA option 1 for cracked concrete

The new expansion sleeve offers 3 legs for better expansion, 6 lugs for better fixing and a zinc coated expansion sleeve (high quality)

There is now an improved efficiency. On average the Fix II needs 25% less hammer blows to install the anchor and 20% less turns of the anchor to achieve full torque

The new Spit Fix II now comes assembled

Specification

Installed by hammering the bolt through the fixture. Expansion clip profile ensures the anchor pre-grips the hole surface prior to setting.

Tightening the anchor, the body pulls into the expansion sleeve, expanding the clip. The anchor exerts a clamping force onto the fixture, securing it against the surface of the substrate.

Bolt grade S 300 Pb NFA 35561or FR 28 NFA 35053, expansion sleeve F12T1 NFA 37501 or XE NFA 36401, washer E24 or equivalent to NFE25 - 513, nut grade 6 or 8 NF EN 20898 - 2, zinc plated to 5µm

Spit Fix Z Stainless Steel

Bolt grade A4 - 70 grade X2 Cr Ni Mo 17Ð12-2 NF ISO / DIS 3506-1, expansion sleeve A4 grade X2 Cr Ni Mo 17 - 12 - 2 NF EN 10088 - 2, washer A4 grade X5 Cr Ni Mo 17 - 12 - 2, nut grade A4 - 80 grade X5 Cr Ni Mo 17 - 12 - 2 F ISO / DIS 3506 - 2 100 134

Installation

Drill the correct diameter hole to the required depth for the Spit Fix selected

Remove debris from hole by blowing out with compressed air or hand held blow out pump

Pre assemble nut and washer

Install the anchor in the hole with a hammer until washer seats on fixture

Tighten bolt with a torque wrench to recommended assembly torque

Substrates

Concrete, non cracked concrete

Product Range

Spit Fix II Assembled Through Bolt Anchor

Code	Thread Ø	Drill Ø	Max Fixture*	Length	Box Qty
050510	M6	6mm	10mm	45mm	100
050520	M6	6mm	20mm	55mm	100
050530	M6	6mm	50mm	85mm	100
050435	M8	8mm	5-0mm	55mm	100
056410	M8	8mm	20-7mm	70mm	100
056420	M8	8mm	40-27mm	90mm	50
056430	M8	8mm	80-67mm	130mm	50
050436	M10	10mm	5-0mm	65mm	50
056530	M10	10mm	15-5mm	75mm	50
056540	M10	10mm	36-25mm	96mm	50
050375	M10	10mm	60-50mm	120mm	25
056550	M10	10mm	80-70mm	140mm	25
050376	M12	12mm	5-0mm	80mm	20
056580	M12	12mm	25-8mm	100mm	20
050374	M12	12mm	40-23mm	115mm	25
056590	M12	12mm	65-48mm	140mm	25
050377	M12	12mm	85-65mm	160mm	25
056650	M12	12mm	105-88mm	180mm	25
056660	M12	12mm	145-128mm	220mm	25
050378	M16	16mm	5-0mm	100mm	25
056700	M16	16mm	30-8mm	125mm	25
050379	M16	16mm	55-33mm	150mm	10
056710	M16	16mm	75-53mm	170mm	10
050382	M20	20mm	10-0mm	120mm	10
056730	M20	20mm	50-25mm	160mm	10
056740	M20	20mm	105-80mm	215mm	10

*Where there are two figures given, the second is maximum fixture thickness in case of deep embedment

Spit Fix Z Through Bolt Anchor - Stainless Steel

Code	Thread Ø	Drill Ø	Max Fixture	Length	Box Qty
050441	M8	8mm	5mm	55mm	100
054610	M8	8mm	20-7mm	70mm	100
054620	M8	8mm	40-7mm	90mm	100
050367	M8	8mm	80-67mm	130mm	50
050466	M10	10mm	5mm	65mm	50
054630	M10	10mm	15mm	75mm	50
054640	M10	10mm	35-20mm	95mm	50
050442	M10	10mm	60-45mm	120mm	25
054670	M12	12mm	5mm	80mm	20
054650	M12	12mm	25-6mm	100mm	20
050368	M12	12mm	40-21mm	115mm	25
054680	M12	12mm	65-46mm	140mm	25
050443	M16	16mm	30-8mm	125mm	25
054700	M16	16mm	55-33mm	150mm	10
050444	M16	16mm	75-58mm	170mm	10

Spit Fix II Through Bolt Anchor - Hot Dipped Galvanized

Code	Thread Ø	Drill Ø	Max Fixture	Length	Box Qty
050310	M8	8mm	20mm	70mm	100
050320	M8	8mm	40mm	90mm	50
050330	M8	8mm	80mm	130mm	50
050350	M10	10mm	15mm	75mm	50
050360	M10	10mm	35mm	95mm	50
050340	M10	10mm	60mm	120mm	25
050370	M10	10mm	80mm	140mm	25
050390	M12	12mm	25mm	100mm	20
050400	M12	12mm	65mm	140mm	25
050410	M12	12mm	105mm	180mm	25
050440	M16	16mm	30mm	125mm	25
050450	M16	16mm	75mm	170mm	10

Approvals

Downloads

Where now?

Find your nearest distributor

Need help selecting the right fixing

Join the club