Spit Fast Hammer Screw Anchor
Hammer-in anchor for fixing to concrete - demountable, quick through fixing concrete
Applications
|
|
Drywall track & brackets, metal lathe (with washer), brick ties,
skirting boards, battens / sole plates, brackets, boxes, metal frames, collars
|
Product Features
| Demountable |
| Wide collar ensures tight fixing |
| Through fixing lowers in place costs |
| Fast installation |
Specification
|
By hammering in the fixing, the drive nail pushes against the pre-expansion collar until the sleeve is
fully located. Further hammering or tightening the screw causes the sleeve to expand. When point of
contact is made in the hole the screw is drawn in towards the fixing until flush with the fixture surface.
|
|
Material Sleeve |
|
Polyamide 6 is resistant to weathering ageing and rotting, it can withstand
temperatures from - 20ºC to + 60ºC. It has good electrical insulation properties. It has high tensile
and compressive strength and is largely resistant to chemical attack.
Screw: Zinc plated 5µm
|
Installation
|
| Drill a hole through the part to be fixed according to the diameter of the fixing, blow out dust. If the fixture thickness is less than the maximum given in the table below, the hole depth has to be increased accordingly |
| Insert the anchor by hand as deep as possible |
| Tap on the expansion nail to obtain the complete setting of the anchor and until the head of the nail comes into contact with the flange of the sleeve |
| Inserting the anchor by hand until contact of the flange with the part to be fixed |
| Expand by screwing with a screw driving machine and suitable pozi-drive bit |
Substrates
Product Range
| Code | Description | Anchor Ø | Length | Max Fixture | Box Qty |
|---|
| 565042 | 5-25-1 | 5mm | 25mm | 1mm | 100 |
| 565043 | 5-35-5 | 5mm | 35mm | 5mm | 100 |
| 565360 | 5-45-15 | 5mm | 45mm | 15mm | 100 |
| 565044 | 6-35-5 | 6mm | 35mm | 5mm | 100 |
| 565045 | 6-45-15 | 6mm | 45mm | 15mm | 100 |
| 565046 | 6-55-25 | 6mm | 55mm | 25mm | 100 |
| 565364 | 6-70-45 | 6mm | 70mm | 45mm | 100 |
| 565365 | 8-45-15 | 8mm | 45mm | 15mm | 100 |
| 565366 | 8-60-35 | 8mm | 60mm | 35mm | 50 |
| 565367 | 8-75-40 | 8mm | 75mm | 40mm | 50 |
| 565368 | 8-100-60 | 8mm | 100mm | 60mm | 50 |
| 565369 | 8-120-80 | 8mm | 120mm | 80mm | 50 |
| 565370 | 8-135-95 | 8mm | 135mm | 95mm | 50 |
NB Countersunk sleeve head range
