Spit ISO Universal Insulation Anchor

A pre-assembled through fixing anchor for quick and easy installation of insulation materials

Fixing of rigid insulation onto solid materials, internal & external insulation boards

The anchor must be protected from UV rays by a suitable screen such as rendering or panelling

Rough cast head provides a key for render

Quick and easy to install through the insulation Ø 50 for rigid insulation material

Very good performance in hollow materials

Rigid, watertight glass fibre nail

Plastic anchor reduces cold bridging compared with metal fixings

Deep profile and expansion legs ensure excellent pullout resistance even in

hollow block and lightweight materials

Sealing ring prevents passage of moisture through anchor body

Serrated shank gives added pullout resistance

The expansion portion of the anchor is set by hammering in an integral expansion nail

Expansion nail: Glass reinforced polyamide 6 (Except part 057600 - Polypropylene nail)

Anchor Body: Polypropylene Thermal conductivity 0.12 W/m - ºC Temperature Range in use - 30ºC to +80ºC

Drill a hole through the insulation material according to the total length of anchor plus 20mm

Insert the anchor until the head contacts the insulating material. The anchoring depth in the base material must be at least 30mm

Insert the expansion nail in the anchor. Then expand with a hammer until the nail is flush

Concrete, hollow floor beams, solid block, solid brick, stone

Code	Description	Drill Ø	Length	Max Fixture	Box Qty
057600	10-30	10mm	60mm	30mm	200
057610	40-60	10mm	90mm	60mm	200
057620	70-80	10mm	110mm	80mm	200
057630	90-100	10mm	130mm	100mm	200
057640	110-120	10mm	150mm	120mm	200

Downloads