Spit Hollow Wall Anchor
Pre-assembled cavity fixing - Locks into base material allowing removal & refit of
fixture with demountable screw
Applications
|
|
Bathroom fixtures, kitchen fixtures, shelving brackets, ceiling fixture
|
Product Features
| Flush finish low profile head |
| Large flange prevents pull into base material |
| Anti rotation barbs prevent spinning in the hole |
| Can be set with a setting tool or by using a screwdriver for smaller sizes |
| 5 expansion legs give full support (M5 and M6) |
| Expanded by special tool or screwdriver |
Specification
|
Anchor for hollow base materials. For correct setting use the setting tool to ensure that the legs collapse fully,
to spread the load over a wide area.
|
|
Pressed steel body - Zinc plated 5µm
Machined screw - Zinc plated 5µm
|
Installation
|
| Drill the recommended sized hole through the material then tap the anchor into the hole until it is flush with the surface |
| Attach anchor setting tool to screw and expand the anchor. Small sizes may be set using a screwdriver |
| Remove the screw and place through the hole in the fixture then back into the hollow wall anchor and tighten the screw |
Substrates
| Hollow block, hollow floor slab, hollow brick, plasterboard |
Product Range
| Code | Screw Size | Hole Ø | Wall Thickness | Box Qty |
|---|
| 920671 | M4x25 | 8mm | 0-5mm | 100 |
| 920672 | M4x45 | 8mm | 8-16mm | 100 |
| 920673 | M4x50 | 8mm | 16-23mm | 100 |
| 920674 | M5x45 | 10mm | 6-13mm | 100 |
| 920675 | M5x60 | 10mm | 8-16mm | 100 |
| 920676 | M5x70 | 10mm | 16-32mm | 100 |
| 920677 | M5x60 | 13mm | 7-16mm | 100 |
| 920678 | M5x70 | 13mm | 16-32mm | 100 |
