Guardia has been developed as a dedicated safety barrier fixing that provides an attractive dome head finish
and the ability to out perform nearly every other mechanical anchor of a similar size.
Applications
Fixing safety barriers into concrete
Product Features
Heat Treated Cone – ensures deformation during expansion
Anti-rotation projections – prevents the cone from rotating during expansion
Adjustable – allows up to 10mm of vertical adjustment
Security Stop Mark - indicates how far the anchor can be unscrewed without compromising the fixing into the concrete
Ring Adjustment System – ensures maximum contact between part to be fixed and the concrete by allowing you to lift the upper part of the anchor to adjust whilst the bottom stays seated in the concrete.
Grooves – increase the grip in the concrete
Wide Washer – ensures no deformation from high pressure during installation
Forged Bolt Head - provides an attractive dome head finish
Removable – can be unscrewed, adjusted and re-installed
Close Edge Fixing – can be set as close as 50mm from the edge of the concrete
Specification
Total length: 105mm
Maximum Fixture Thickness: 20mm
Body/Drilling Diameter: M12
Thread Diameter: 8mm
Drilling Depth (including fixture) 115mm
Tightening Torque: 35Nm
White Zinc Plated Cr VI Free.
Installation
Drill 12mm hole 115mm deep through fixture and into concrete (see installation picture 1)
Clean hole with blow out tool (see installation picture 2)
Hammer in Guardia (see installation picture 3)
Torque Guardia (see installation picture 4)
Check vertical alignment of barrier and if necessary unscrew Guardia a maximum of 10mm