Spit Drop-In Anchor Range
A broad range of female anchors for threaded rod - Spit Drop-in anchors, including a
new line of lipped anchors for a flush finish, not dependent on hole depth
Applications
|
Mechanical & electrical services, cable trays, pipe work, ventilation ducts,
suspended ceilings, handrails
|
Product Features
| Spit Grip L
|
| Retainer lip keeps the anchor flush with the surface keeping all rods the same length |
| The lip allows installation into hollow materials |
| Cone insert that expands the anchor when driven with setting tool and hammer |
| Reduced diameter for easier setting |
| M10 x 30 now available for shallow embedment to avoid contact with rebar |
| The internal thread has a modified expansion angle, now requiring 20% fewer hammer blows for complete expansion |
| Patented grooves enable deformation of the anchor, making expansion in hard materials easier and more effective |
| White zinc coating - 10 microns (except M10 x 30 / yellow) |
| Spit Grip Stainless Steel |
| The Spit offering for those who demand a stainless steel version of the Drop-In anchor |
| Spit Drop-In |
| Spit also offer a competitively priced alternative in the Drop-In range, available without ETA |
Specification
|
Drop-In & Grip L
|
Internally threaded, hammer set anchors. Flush fix design is pre-set by inserting into the
drilled hole and hammering the internal expansion cone inside the body of the anchor using
a setting tool.
Body steel S300 Pb NFA 35 - 561, expansion cone FB10 NFA 35 - 053.
|
|
Grip Stainless Steel
|
Female, internally threaded, hammer set anchor. Flush fix design is pre-set by inserting into
the drilled hole and hammering the internal expansion cone inside the body of the anchor using
a setting tool.
Body steel stainless steel A4 X5 Cr Ni Mo 17-12-2 expansion cone stainless
steel A4 X5 Cr Ni Mo 17-12-2
|
Installation
|
| Drill the correct diameter hole to the required depth for the Spit Grip selected |
| Clean the hole with a blow out bulb |
| Push the anchor into the hole |
| Insert the relevant Spit expander of the same diameter as the anchor until it makes contact with the cone.
Use a hammer to drive the setting tool into the anchor - stop hammering when the expander shoulder rests against the anchor
or when it is blocked (in hard concrete) |
| Tighten to the recommended torque using a torque wrench |
Substrates
Product Range
Spit Grip Lip Anchor
| Code | Thread Ø | Thread Length | Anchor Length | Box Qty |
|---|
| 050789 | M6 | 13mm | 30mm | 100 |
| 050790 | M8 | 12mm | 30mm | 100 |
| 050799 | M10 | 11mm | 30mm | 100 |
| 050791 | M10 | 15mm | 40mm | 100 |
| 050792 | M12 | 21mm | 50mm | 50 |
| 050793 | M16 | 28mm | 65mm | 20 |
Spit Drop-in Anchor
| Code | Thread Ø | Thread Length | Anchor Length | Box Qty |
|---|
| 060210 | M6 | 13mm | 30mm | 100 |
| 062020 | M8 | 13mm | 30mm | 100 |
| 062330 | M10 | 15mm | 40mm | 100 |
| 062390 | M12 | 18mm | 50mm | 50 |
| 062470 | M16 | 23mm | 65mm | 20 |
Spit Grip Stainless Steel Anchor
| Code | Thread Ø | Thread Length | Anchor Length | Box Qty |
|---|
| 062240 | M6 | 13mm | 30mm | 100 |
| 062250 | M8 | 13mm | 30mm | 100 |
| 062260 | M10 | 15mm | 40mm | 50 |
| 062270 | M12 | 18mm | 50mm | 50 |
| 062280 | M16 | 23mm | 65mm | 25 |
Stainless Steel Setting Tool for Spit Grip Lip
| Code | Description | Box Qty |
|---|
| 062090 | M6 S / Steel Setting Tool | 1 |
| 062100 | M8 S / Steel Setting Tool | 1 |
| 062110 | M10 S / Steel Setting Tool | 1 |
| 062120 | M12 S / Steel Setting Tool | 1 |
| 062130 | M16 S / Steel Setting Tool | 1 |
Scaffold Ring Bolt
| Code | Description | Box Qty |
|---|
| 997120 | M16 x 210mm Scaffold Ring Bolt | 1 |
Approvals
