Epomax Vinylester Resin

Easy to pump, performance resin - Fast curing vinylester resin, saving time and money on site

Applications

Steel framed structures, machinery, storage silos, refinery pipe work supports, motorway signs, safety barriers

Product Features

Cartridge is self UV protected for better conservation

M8 - M30 stud range with it’s approval

Styrene free

30% better performance over Epomix

Fast setting and cure time (setting 6.5 mins cure 110 mins)

Fire tested following regulation TR 020

Bottom of cartridge is now sealed to prevent leaking / stickiness

Specification

Epomax is a 10:1 resin injection fixing system. On application the pre-mixed resin is injected into the fixing hole. Studs, or internally threaded sockets, are installed immediately and the resin allowed cure time. Epomax Vinylester resin (epoxy acrylate) easy pumping formula, catalytic hardener

Installation

Drill correct diameter hole to recommended depth

Clean hole thoroughly with brush and air pump twice

Assemble nozzle onto cartridge. Extrude resin until an even mix is achieved and then inject into hole

Insert stud by hand to full depth, using slow rotating movement

Allow Epomax to cure for specified period before loading

Substrates

Concrete, solid brick stone, solid brick, hollow block wall, hollow brick, hollow floor beams

Product Range

Code	Description	Box Qty	Carton Qty
050883	Epomax Cartridge (150ml)	1	10
050885	Epomax Cartridge (380ml)	1	10
051033	Epomax Cartridge (380ml)	1	20
050882	Epomax / C Mix Nozzle	1	5
995940	Extension Nozzle	1	1

Epomax Application Tools

Code	Description	Box Qty
771510	Epomax Injection Tool	1

Accessories

Satelis Sockets

Code	Description	Thread Ø	Drill Ø	Thread Length	Box Qty
062340	M6	6mm	20mm	15mm	10
062350	M8	8mm	20mm	20mm	10
062360	M10	10mm	20mm	23mm	10

Satelis Studs

Code	Description	Thread Ø	Drill Ø	Max Fixture	Box Qty
062300	M8x80	8mm	20mm	10mm	10
062310	M10x90	10mm	20mm	18mm	10
062320	M12x100	12mm	20mm	25mm	10

Threaded Studs - Zink Plated 45^o Chisel Point

Code	Description	Max Fixture	Hole Ø	Hole Depth	Box Qty
920830	M8x110	18mm	10mm	80mm	10
920831	M10x130	25mm	12mm	90mm	10
920832	M12x160	34mm	14mm	110mm	10
920833	M16x190	45mm	18mm	125mm	10
920834	M20x260	55mm	25mm	170mm	10
920835	M24x300	55mm	28mm	210mm	5
920836*	M30x380	55mm	35mm	280mm	1

*Requires setting tool code 920207 available to order

Threaded Studs - S/S A4-316 45^o Single Cut Chisel Point

Code	Description	Max Fixture	Hole Ø	Hole Depth	Box Qty
920017	M8x110	18mm	10mm	80mm	10
920018	M10x130	25mm	12mm	90mm	10
920019	M12x160	34mm	14mm	110mm	10
920020	M16x190	45mm	18mm	125mm	10
920021	M20x260	55mm	25mm	170mm	10
920022	M24x300	55mm	28mm	210mm	5

Setting Tools for S / Steel Studs

Code	Stud Ø	Box Qty
920201	M8	1
920202	M10	1
920203	M12	1
920204	M16	1
920205	M20	1
920206	M24	1
920207*	M30	1

* Order to order only, minimum order quantities apply

Rose Head Threaded Studs S / Steel A2-304 45^o Single Cut

Code	Description	Max Fixture	Hole Ø	Hole Depth	Box Qty
052400	M8x110	18mm	10mm	80mm	10
052410	M10x130	25mm	12mm	90mm	10
052420	M12x160	34mm	14mm	110mm	10
052440	M16x190	45mm	18mm	125mm	10
052450	M20x260	55mm	25mm	170mm	10
052470	M24x300	55mm	28mm	210mm	10
052490	M30x380	55mm	35mm	280mm	5

Rose Head Threaded Studs Zinc Plated 45^o Single Cut

Code	Description	Max Fixture	Hole Ø	Hole Depth	Box Qty
050950	M8x110	18mm	10mm	80mm	10
050960	M10x130	25mm	12mm	90mm	10
050970	M12x160	34mm	14mm	110mm	10
050980	M16x190	45mm	18mm	125mm	10
655220	M20x260	55mm	25mm	170mm	10
655240	M24x300	55mm	28mm	210mm	10
050940	M30x380	55mm	35mmm	280mm	5

Internally Threaded Sockets Zinc Plated 45^o Single Cut

Code	Description	Thread Length	Hole Ø	Hole Depth	Box Qty
921071	M8x90	25mm	14mm	90mm	10
921073	M10x90	30mm	18mm	90mm	10
921075	M12x90	35mm	22mm	90mm	10
921077	M16x125	50mm	28mm	125mm	10

Internally Threaded Socket S / Steel

Code	Description	Thread Length	Hole Ø	Hole Depth	Box Qty
921072	M8x90	25mm	14mm	90mm	10
921074	M10x90	30mm	18mm	90mm	10
921076	M12x90	35mm	22mm	90mm	10
921078	M16x125	50mm	28mm	125mm	10

Setting Tools for Internally Threaded Sockets

Code	Thread Ø	Box Qty
920208	M8	1
920209	M10	1
920210	M12	1
920211	M16	1

Hole Cleaning Accessories

Code	Description	Box Qty
051005	Wire Brush Head Ø 10mm x 120mm	1
051006	Wire Brush Head Ø 16mm x 120mm	1
051007	Wire Brush Head Ø 25mm x 120mm	1
051008	Wire Brush Head Ø 30mm x 120mm	1
051009	Wire Brush 'T' Handle	1
051010	Wire Brush Handle Extension	1
065990	Hand Operated Blow Out Tool	1

Perforated Sleeve for Hollow Base Materials

Code	Description	To Suit Stud	Box Qty
063400	Sleeve Ø 12.5mm x 1m	M8 / 10	1
063410	Sleeve Ø 15mm x 1m	M12	1
063420	Sleeve Ø 20.5mm x 1m	M16	1
063430	Sleeve Ø 26mm x 1m	M20	1
063460	Plastic Cap	M8 / 10	100
063470	Plastic Cap	M12	100
063480	Plastic Cap	M16	100
063490	Plastic Cap	M20	100